- Description
-
Details
Here's a 1-Wire controller with two open-drain GPIO.
You can put as many of the DS2413's as you want on a single I/O line, each one is uniquely addressable and shares the single I/O pin happily. The two controllable I/O lines (PIOA and PIOB) can be used as inputs or outputs. They are open-drain, so if you want to power an LED or something, you'll need a remote power supply (see Maxim's product page for more details)
Check out this basic Arduino sketch that uses the OneWire library to communicate with this chip. Don't forget to add the 4.7Kohm resistor from I/O to your 1-Wire controller power supply (3.3V - 5V) on the Arduino side of the wires.
- Dimensions: 15.78mm / 0.62" x 9.96mm / 0.39" x 2.94mm / 0.11"
- Reviews
-