- Description
-
Details
EMG detector is a bridge connects human body and electrical, the sensor gathers small muscle signal then process with 2th amplify and filter, the output signal can be recognized by Arduino. You can add this signal into your control system. Note: The sensor cannot be used for medical purposes.In standby mode, the output voltage is 1.5V. When detect muscle active, the output signal rise up, the maximum voltage is 3.3V. You can use this sensor in 3.3V or 5V system.Features:- Grove Compatible
- 3.5mm Connector
- 6 Disposable Surface Electrodes
- Power supply voltage: 3.3V-5V
- 1000mm Cable Leads
- No additional power supply
MoveWhen finish downloading demo code, it'll take about 5s to initialize, you should keep static when initializing.You can see that when initializing, the Led Bar will go form level 10 to level 0. When Led Bar All off, you can move now.When you are moving, you can find that the level of Led Bar will change.ResourceDocumentsPlease visit Seeed wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to Seeed forum.
- Reviews
-
Grove System
Grove is a modular, ready-to-use tool set developed by Seeed Studio. It takes a building block approach to assembling electronics. Compared with the traditional, complicated learning method of using a breadboard and various electronic components to assemble a project, Grove simplifies and condenses the learning process significantly. The Grove system consists of a base shield and various modules with standardized connectors.
Learn View Grove System Wiki